Parts List For Presentation Codec; Adding A Presentation Codec - Cisco TelePresence System Series Hardware Upgrade Manual

Chapter 5 Options for the Cisco TelePresence System 1300

Parts List for Presentation Codec

Key Part Description
Presentation Codec, 800-28202-xx
1
Secondary (Presentation) codec

Adding a Presentation Codec

To add the Cisco TelePresence Presentation Codec to the CTS-1000, complete the following procedure:
Procedure
Step 1 Remove the cabinet cover by holding it from underneath and raising it slightly; then, grasp it from the
top and gently rock it towards you to disengage it from the slots in the upper part of the cabinet. See
Figure 5-5
Turn off the power by turning the switch in the PDU that is inside of the cabinet to the "OFF" position.
Step 2
This switch is located near the cabinet cover, in the lower front of the cabinet.
Note
OL-16441-01
Part Number
800-28202-xx
for more information.
Cisco TelePresence Presentation Codec
Qty Notes
1
Cisco TelePresence System
5-5