Cisco TelePresence System Series Hardware Upgrade Manual page 12

Cisco Digital Media Player
Step 3 Replace the codec cover.
Insert the HDMI connection for the DMP into the connection labeled "Aux" that is at the foot of the
Step 4
column base (callout 3 in
If you have a table stand system, these connections are at the foot of the table stand.
Note
If you want to share a presentation, use the VGA and, if required, audio connections labeled "PC" that
Note
are shown as callouts 7 and 8 in
Figure 1-3 Connections at the Foot of the Column or Table Stand
1
INPUT: 100-240V~, 5A, 50/60Hz
5
If you use a Cisco Unified IP Phone as your call control device, and you have a document camera and a
Note
Cisco Digital Media Player (DMP) connected to the CTS 500 32", and the document camera video does
not display during a conference, use the View softkey on the Cisco Unified IP Phone to view the
document camera video.
Cisco TelePresence System
1-4
Figure
2 3
6 7
Chapter 1
1-3).
Figure 1-3.
4
Aux
PC
8
Options for the Cisco TelePresence System 500 32"
OL-16441-01