Adding The Auxiliary Control Unit - Cisco TelePresence System Series Hardware Upgrade Manual
Hide thumbs
Also See for TelePresence System Series:
- User manual (51 pages) ,
- Quick reference manual (2 pages) ,
- Getting started manual (41 pages)
Table of Contents
Advertisement
Chapter 6
Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
Adding the Auxiliary Control Unit
If your system already has an auxiliary control unit, bypass this procedure.
Note
To add the auxiliary control unit Cisco TelePresence 3000, you need the following tools and equipment:
•
•
Remove and replace the audio/video extension unit by performing the following procedure:
Step 1
Remove the auxiliary control unit from its packaging.
Attach the auxiliary control unit to its bracket using the supplied 5 mm screws.
Step 2
OL-16441-01
Large Phillips head screwdriver
Masking tape
Upgrading a CTS 3000 to a CTS 3200
Cisco TelePresence System
6-37
Advertisement
Table of Contents
