4
Repair Guide
Ensure that the connection is correct during reassembly to prevent any
CAUTION
power trip.
Apply glue to the connectors to attach the connectors to the PSU permanently.
NOTE
Figure 4-65
144
c Loosen the two screws to remove the two power cable with the
12 in-Ibs Pozit screwdriver as shown in
d For new PSU replacement, a new standby ON-OFF cable (08990-61614) is
needed to install on the PSU as shown in
Loosen the screws to remove the power cables
Figure
4-65.
Figure
4-65.
Keysight 8990B Service Guide
8-pin
connector
(Standby
cable)