Figure 4-25 Remove The Breakaway Board - Keysight 8990B Service Manual

17 There are four latches that connect the breakaway board to the sheet metal. To
Figure 4-25
18 Disconnect the cable from the back of the breakaway board as shown in
Keysight 8990B Service Guide
remove the breakaway board that is located underneath the front panel
keyboard, pull it directly away from the touchscreen to disengage the latches
and then pull up to the board as shown in
These are two of the latches you are disengaging when
Touchscreen
you pull the board straight away from the touchscreen
Remove the breakaway board
Figure 4-26.
Repair Guide
Figure 4-25.
Push the breakaway
board straight out
away from the
touchscreen and
then lift it up
This is the edge
that breaks away
from the front
panel keyboard
(they come
attached together)
4
109