MacDon D1 Series Unloading And Assembly Instructions page 172

7. Load header onto trailer. Place wooden blocks under
cutterbar and float module frame as required to stabilize
header.
8. Back up slowly and move forklift away from flat deck.
9. Secure with hauler's tie-down straps and chains.
IMPORTANT:
Route tie-down straps (A) under the reel tube to avoid
severely damaging reel tube. Ensure strap clears reel
tine tubes.
215184
LOADING HEADER FOR TRANSPORT TO DEALERSHIP
148
Figure 4.9: Header on Flat Deck
A
Figure 4.10: Header on Flat Deck
1008357
Revision A