MacDon D1 Series Unloading And Assembly Instructions page 4

Summary of Changes
At MacDon, we're continuously making improvements, and occasionally these improvements affect product
documentation. The following list provides an account of major changes from the previous version of this document.
Section
Inside front cover
Throughout
Throughout
Introduction, page i
2.2 Separating Headers, page 7
2.2 Separating Headers, page 7
• Step
6, page 8
2.2 Separating Headers, page 7
• Step
9, page 9
2.3.1 Forklift Method, page 12
Lifting Single Header, page 13
215184
Summary of Change
Added copyright and disclaimer.
Made sure the following statements are now a WARNING for
consistency:
• Check to be sure all bystanders have cleared the area.
• Clear the area of other persons, pets etc. Keep children away
from machinery. Walk around the machine to be sure no one
is under, on, or close to it.
• Never start or move the machine until you are sure all
bystanders have cleared the area.
• Equipment used for loading and unloading must meet or
exceed the minimum specified requirements. Using
inadequate equipment may result in vehicle tipping, machine
damage, or chain breakage.
Made sure the following statements are now a DANGER for
consistency:
• To avoid bodily injury or death from unexpected start-up or
fall of a raised machine, always stop engine and remove key
before leaving the operator's seat, and always engage safety
props before going under the machine for any reason.
Added conventions.
Added NOTE:
• Unless otherwise specified, discard stands, shipping material,
and hardware. Removable stands and supports are painted
yellow or unpainted.
Added header size to picture caption for clarity.
Added "double reel only" to step.
Changed the following IMPORTANT to a WARNING for
consistency:
• Equipment used for loading and unloading must meet or
exceed the minimum specified requirements. Using
inadequate equipment may result in vehicle tipping, machine
damage, or chain breakage.
Changed the following IMPORTANT to a WARNING for
consistency:
• Equipment used for loading and unloading must meet or
exceed the minimum specified requirements. Using
ii
Internal Use
Only
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Revision A