Adjusting Auto Reel Speed - Claas 8000/7000 Series - MacDon D1 Series Unloading And Assembly Instructions

1. From the main page, select FRONT ATTACHMENT (A).
2. From the drop down list, select FRONT ATTACHMENT
PARAMETERS (A).
3. Scroll through the list and select DROP RATE WITH AUTO
CONTOUR icon (A).
4. Adjust the drop rate by sliding adjuster arrow (B) up
or down.
5. Select check mark (C) to confirm settings.
Adjusting Auto Reel Speed – CLAAS 8000/7000 Series
WARNING
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to be sure no
one is under, on, or close to it.
215184
SETTING UP AUTO HEADER HEIGHT CONTROL
389
Figure 9.190: CEBIS Main Page
Figure 9.191: Front Attachment Parameters Page
A
Figure 9.192: Drop Rate with Auto Contour Page
A
1031500
A
1031569
B
C
1031568
Revision A