MacDon D1 Series Unloading And Assembly Instructions page 8

Section
6.2.3 Converting from Medium
Configuration or Wide
Configuration to Narrow
Configuration, page 185
6.2.3 Converting from Medium
Configuration or Wide
Configuration to Narrow
Configuration, page 185
• Step
10, page 186
6.2.6 Converting from Ultra
Narrow or Narrow Configuration
to Wide or Ultra Wide
Configuration, page 190
6.2.6 Converting from Ultra
Narrow or Narrow Configuration
to Wide or Ultra Wide
Configuration, page 190
• Step
6, page 191
• Step
8, page 191
6.2.7 Converting from Wide
Configuration to Ultra Wide
Configuration, page 192
6.2.8 Converting from Medium
Configuration or Wide
Configuration to Ultra Narrow
Configuration, page 192
• Step
30, page 195
6.2.8 Converting from Medium
Configuration or Wide
Configuration to Ultra Narrow
Configuration, page 192
• Step
32, page 195
6.2.9 Converting from Narrow
Configuration to Ultra Narrow
Configuration, page 196
• Step
18, page 198
6.2.9 Converting from Narrow
Configuration to Ultra Narrow
Configuration, page 196
• Step
20, page 198
6.2.10 Installing Feed Auger
Fingers, page 198
215184
Summary of Change
Reworded introductory NOTE as follows:
• Flighting performs best when no gaps are present. If desired,
use silicone sealant to fill the gaps.
Added NOTE.
Removed footnote:
• MD #287031 contains wear-resistant flightings, and is
available only through MacDon Parts.
Removed NOTE:
• Flightings are NOT included in this kit. Order flighting kit
MD #287031 separately.
Changed topic title. Was previously titled "Optional Modification
to Wide Configuration."
Simplified NOTE:
• Flighting performs best when no gaps are present. If desired,
use silicone sealant to fill the gaps.
Changed torque from 8.5 Nm (75 lbf∙in) to 9 Nm (80 lbf∙in).
Simplified NOTE:
• Flighting performs best when no gaps are present. If desired,
use silicone sealant to fill the gaps.
Changed torque from 8.5 Nm (75 lbf∙in) to 9 Nm (80 lbf∙in).
Removed the following DANGER only because this procedure is
for the initial setup of the float module (the float module is not
operational at this point):
vi
Internal Use
Only
Product Support
Tech Pubs
Tech Pubs
Tech Pubs
Tech Pubs
Product Support
Engineering
Product Support
Engineering
Tech Pubs
Revision A