5.6 Shutting down the engine
Fig. 25
Fig. 26
Fig. 27
NOTICE!
Do not shut the engine down all of the sudden from full
speed, but let it idle for a while for temperature equali-
zation.
Set the throttle lever Ä Fig. 25 to position "MIN" (idle speed).
Run the engine for a short while in idle speed.
Set the engine stop switch Ä Fig. 26 to position "OFF".
WARNING!
Danger of burning! Danger of accident!
Immediately after shutting down the engine is still hot,
do not touch the exhaust.
Park the machine so that it cannot turn over.
Pull the rope by the starter handle Ä Fig. 27 until resistance
can be felt.
Let the starter handle run back to initial position.
This measure avoids moisture deposits in the engine.
BT 60 / BT 65
Operation
37