Fig. 48
Fig. 49
Fig. 50
Fig. 51
Unscrew the fastening screws (1) and (2) Ä Fig. 48 of the air
filter housing.
Lift up the steering bow with the tank and fasten it to the
housing with the screw Ä Fig. 49. Tighten the screw hand-
tight (max. tightening force 50 Nm (37 ft.lbs)).
Unscrew the fastening screws for the cylinder head cover
Ä Fig. 50.
NOTICE!
Do not apply force to remove the cylinder head cover.
Replace the cylinder head cover if it is dented.
Insert the screw driver into the recess Ä Fig. 51 and take the
cylinder head cover carefully off.
BT 60 / BT 65
Maintenance
57