Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 71

Maintenance
Fig. 85
72
In case of dry fine dust blow out the air filter carefully from
inside to outside with dry, clean compressed air (max. 2 bar
(29 psi)) Ä Fig. 85.
NOTICE!
Before installation check seals and air filter for
damage, replace if necessary.
Assemble the air filter (5) Ä Fig. 84 and the air filter cover
(3) to the air filter housing and tighten the screws (4)
Connect the air guide hose (1) to the air filter housing and
tighten the hose clamp (2).
Assemble the protection grid on the left hand side of the
engine. Retighten the fastening screws with a tightening
torque of 25 Nm (18 ft.lbs).
BT 60 / BT 65