Operation
5.6 Shutting down the engine
Caution
!
Do not shut the engine down all of the sudden
from full speed, but let it idle for a while for
temperature equalization.
Fig. 25
Set the throttle lever (Fig. 25) to position "MIN"
l
(idle speed).
Run the engine for a short while in idle speed.
l
Fig. 26
Set the engine stop switch (Fig. 26) to position
l
"OFF".
Danger
!
Danger of burning! Danger of accident!
Immediately after shutting down the engine is
still hot, do not touch the exhaust.
Park the machine so that it cannot turn over.
30
Fig. 27
Pull the rope by the starter handle (Fig. 27) un-
l
til resistance can be felt.
Let the starter handle run back to initial posi-
l
tion.
i
Note
This procedure protects against moisture deposits
inside the engine.
541041
BOMAG
BT 60/4, BT 65/4