Adjusting The Steering Bow - Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual

Operation

5.3 Adjusting the steering bow

Fig. 11
30
The steering bow has two positions.
The steering bow can be adjusted to the height of the
operator by using the bore holes (1) and (2)
(1) lowest position
(2) highest position
Loosen the screws (1) on both sides and pull them out.
Set the steering bow to the desired height.
Fasten the screws (1) on both sides using the bores (1) or
(2).
BT 60 / BT 65
Ä Fig. 11: