Maintenance
Fig. 73
Fig. 74
If the starter rope has been torn or
the coil has recoiled completely:
Fig. 75
66
Pull the starter rope completely out by the starter handle
Ä Fig. 73.
Before assembling the rope, turn the coil (2) Ä Fig. 74 5 rev-
olutions in anti-clockwise direction and align the rope open-
ings in coil and housing (5) to one another (A).
Secure the coil (2) Ä Fig. 75 against winding up. For this
purpose tie the coil to the housing (5) with a cable strap (1).
Untie the knots of the starter rope at both ends and remove
the old starter rope.
Thread in the new starter rope (3) and fix it with knots on
both ends.
BT 60 / BT 65