Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 20

Repair
Information and safety stickers/
decals on the machine
Store oil contaminated materials in a separate, specially marked
container and dispose of environmentally.
Cleaning work
Do not perform cleaning work while the motor is running.
Do not use gasoline or other easily inflammable substances for
cleaning.
When using a steam cleaner for cleaning do not subject electrical
parts and insulation material to the direct jet or cover these items
beforehand.
Do not guide the water jet directly into air filter, exhaust pipe and
air intake opening.
After maintenance work
After all maintenance work is completed reinstall all guards and
safety installations.
Repairs must only be carried out by qualified and authorized per-
sonnel. Always follow our repair instructions.
Exhaust gases are highly dangerous! Always ensure an adequate
supply of fresh air when starting in closed rooms!
Attach a warning tag to the steering bow if the machine is defec-
tive.
n Do not mix the nozzle in the carburettor up by mistake.
n Adjust the idling speed regulator screw exactly.
Do not damage the blower wheel when working on the mag-
n
netic ignition.
n Always replace self locking nuts.
n Do not open the foot cover on the tamper foot, spring tension.
Danger of accident!
n Observe the prescribed tightening torques.
Keep safety stickers in good and legible condition (see parts
manual) and comply with their meaning.
Replace damaged and illegible stickers/decals.
BT 60 / BT 65
Safety regulations
21