Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 15

Safety regulations
General
Intended use
Unintended use
Remaining dangers, remaining
risks
16
This BOMAG machine has been built in compliance with the
latest technical standard and complies with the applicable
regulations and technical rules. However, dangers for persons
and property may arise from this machine, if:
n it is used for purposes other than the ones it is intended for,
n it is operated by untrained personnel,
n it is changed or converted in an unprofessional way,
n the safety instructions are not observed.
Each person involved in the operation, maintenance and
repair of the machine must therefore read and comply with
these safety regulations. If necessary, this must be confirmed
by obtaining the signature of the customer.
Furthermore, the following obviously also applies:
n applicable accident prevention instructions,
n generally accepted safety and road traffic regulations,
n country specific safety regulations. It is the duty of the operator
to be acquainted with these instructions and to apply these
accordingly. This applies also for local regulations concerning
different types of handling work. Should the recommendations
in these instructions be different from the regulations valid in
your country, you must comply with the safety regulations valid
in your country.
This machine must only be used for:
Compaction of all types of soils
n
n Repair work in all types of soil
n Reinforcement of walkways
n Work in trenches
n Backfills and compaction of marginal strips
Dangers may arise from the machine when it is used for purposes
other than the one it is intended for.
Any danger caused by intended use is the sole responsibility of the
customer or driver/operator, the manufacturer cannot be made
liable.
Examples for unintended use are:
n Working in horizontal direction
n Ramming of poles
n Vibrating of paving blocks
It is not permitted to stand on the machine while working.
Starting and operation of the machine in explosive environments
and in underground mining is prohibited.
Despite careful work and compliance with standards and regula-
tions it cannot be ruled out that further dangers may arise when
working with and handling the machine.
BT 60 / BT 65