Fig. 60
Fig. 61
Fig. 62
Fig. 63
Set the engine stop switch Ä Fig. 60 to position "OFF" (fuel
valve closed).
Remove the protection grid on the left hand side of the
engine Ä Fig. 61.
NOTICE!
Make sure that no dirt falls into the air intake channel.
Unscrew the fastening screw (4) Ä Fig. 62 from both sides
of the air filter cover.
Loosen hose clamps (5) and pull the fuel hoses off the fuel
filter (3).
Loosen the screw (1) to be able to loosen the clamp (2).
Take the fuel filter out of the clamp.
Install the new fuel filter and observe the flow direction
(arrow).
Retighten the fastening screw (1) Ä Fig. 63 with a tightening
torque of 8 Nm (5.9 ft.lbs).
Fasten the fuel hoses to the fuel filter with hose clamps (5).
NOTICE!
When assembling the air filter cover take care not to
damage the air filter.
BT 60 / BT 65
Maintenance
61