Maintenance Every Month; Change The Engine Oil - Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual

Vibratory tamper
Table of Contents

Advertisement

Maintenance

6.7 Maintenance every month

6.7.1 Change the engine oil

Fig. 39
52
WARNING!
Danger of scalding when draining off hot engine oil.
NOTICE!
Park the machine on level ground.
Drain the engine oil only when the engine is warm.
Check the engine oil level with highest care, to avoid
over or underfilling of the engine. Underfilling or over-
filling can damage the engine.
The engine cannot be started if the engine oil level is
too low.
For quality and quantity of oil refer to the "table of fuels
and lubricants".
ENVIRONMENT!
Catch running out old oil, do not let it seep into the
ground and dispose off environmentally.
Clean the area around oil dipstick (1) Ä Fig. 39 and drain
plug (2).
Unscrew the oil dipstick .
Unscrew the oil drain plug , let the old oil run out and catch it.
Clean the drain plug and screw it back in with a new seal
ring.
Fill in fresh engine oil through the oil filler opening .
The oil level must reach the bottom edge of the filler bore
Ä Fig. 40, top up if necessary.
BT 60 / BT 65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bomag bt 65

Table of Contents