Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 67

Maintenance
Fig. 78
Fig. 79
68
NOTICE!
Ensure strict cleanliness.
Change the oil at operating temperature.
For quality and quantity of oil refer to the "table of fuels
and lubricants".
ENVIRONMENT!
Catch running out oil, do not let it seep into the ground
and dispose off environmentally.
Clean and unscrew the oil drain plug Ä Fig. 78.
Drain off and catch old oil. Tilt the tamper back.
Stand the tamper on its foot and secure it against tipping
over.
Insert the oil drain plug with sealant (low-strength, e.g.
BOMAG 009 700 16) and tighten.
The upper edge of the inspection glass equals the
bottom edge of the oil filling.
Clean the filler plug Ä Fig. 79 and unscrew it.
Fill in new oil.
Screw the filler plug back in with a new seal ring.
BT 60 / BT 65