Work/Operation - Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual

Vibratory tamper
Table of Contents

Advertisement

5.5 Work/operation

Fig. 20
Fig. 21
WARNING!
Danger of accident! Danger of injury!
Always keep an eye on the machine when the engine
is running.
Always hold on to the machine.
Steer the machine only be the steering handle.
Guide the machine so hat your hands do not hit
against solid objects.
Keep your feet clear of the tamper foot plate.
Wear your personal noise protection (ear defenders).
Watch out for unusual noises and development of
smoke. Perform trouble shooting and have the fault
corrected.
NOTICE!
Do not hold the throttle lever in the area below 3600
min
-1
, since this would destroy the centrifugal clutch.
Set the throttle lever Ä Fig. 20 to position "MAX".
The machine works with highest frequency.
To achieve uniform running you should actuate the throttle
lever within range "I" (3600 bis 4200 min
depending on condition and density of soil.
BT 60 / BT 65
Operation
-1
) Ä Fig. 21,
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bomag bt 65

Table of Contents