Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 32

Vibratory tamper
Table of Contents

Advertisement

Fig. 17
Fig. 18
Starting under cold weather condi-
tions
Engine oil level too low
Fig. 19
Open the choke Ä Fig. 17 3 to 6 seconds after the engine
has started running.
Set the throttle lever Ä Fig. 18 to position "MIN" and let the
engine run warm for 1 to 2 minutes.
Once the engine has warmed up you can start to work
with the tamper.
If the engine stops again after approx. 3 to 5 seconds, close
the choke again and repeat the starting process.
The engine does not start if the oil level is too low. This is indicated
by the engine oil level warning lamp Ä Fig. 19 when operating the
recoil starter.
Check the engine oil level, fill up if necessary.
Repeat the starting procedure.
BT 60 / BT 65
Operation
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bomag bt 65

Table of Contents