Fayat BOMAG BT 60 Operating And Maintenance Instructions Manual page 39

Operation
Fig. 32
Fig. 33
40
Lay down the tamper to transport it on the rollers.
Lean the tamper foot against the wall of the transport vehicle
Ä Fig. 32.
Lash the tamper down to the transport vehicle, so that it is
secured against rolling, sliding and turning over.
WARNING!
Danger of accident! Life hazard!
Only expert personnel (qualified persons) are allowed
to attach lifting tackle to loads and to lift loads.
Use only safe lifting gear of sufficient load bearing
capacity Minimum lifting capacity of lifting gear: see
operating weight in chapter "Technical Data".
Always use appropriate lifting and lashing means on
the lifting and lashing points.
Check all lifting and lashing points for damage before
lifting or lashing down the machine. Do not use dam-
aged or in any other way impaired lashing points.
Do not lift or lower the machine jerkily.
The tension must always be effective in vertical direc-
tion.
The machine must not swing about when being lifted.
Do not step or stand under suspended loads.
For loading the machine attach the lifting gear only to the
lifting eye provided for this purpose Ä Fig. 33.
BT 60 / BT 65