Configuring An Ftp Share - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
7.
----End
Result
After configuring an NFS share, perform the following steps to check whether the parameters
are set successfully:
1.
2.
3.
4.
5.
6.
7.

4.7.2.6 Configuring an FTP Share

FTP is a type of communication protocol widely used on the Internet. To implement
FTP-based file transfer, you must install software that supports FTP on the server and clients.
In addition, you must configure and enable the FTP share feature on the server before FTP
clients can access the shared folders on the server.
Prerequisites


Procedure
Step 1 Choose Tools > Internet Information Service(IIS) Manager from the menu bar of the
Server Manager.
Step 2 Right-click the local server and choose Add FTP Site from the shortcut menu.
Issue 04 (2018-11-06)
example, if you want to prohibit audio and video files from being stored in the specified
folder, select Block Audio and Video Files.
Click Create.
On a computer running a Linux operating system, run the showmount command to
query accessible NFS shared folders.
On a computer running a Linux operating system, run the mount -t nfs -o bg,soft,intr
97.100.100.121:shares /mnt/pp command to mount the shared folder.
 97.100.100.121 is the service IP address of the shared server.
 :shares is the name of the shared folder.
 /mnt/pp is the name of a folder on the local client. Create the folder in advance.
Run the cd /mnt/pp command to go to the mounted local directory.
Run the ll command to view the contents in the local directory. The folders and files in
the shared directory are displayed.
On the client, run the cat xxx.txt command to view the specified file. The file contents in
the shared directory are displayed.
Add and delete folders and files on the local client. Then, check that these changes are
made accordingly in the shared directory.
To enable the client to automatically mount the N2000 shared directory after the client is
restarted, run the vi /etc/fstab command, and add 97.100.100.121:/shares /mnt/pp nfs
defaults 0 0 to the end of the file.
In the previous example, the SUSE 11 client is used for reference only. You must perform the
configuration based on the actual operating system running on your client.
The hardware of the N2000 server has been installed and powered on.
You have logged in to Windows Storage Server 2012.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the N2000H V3
102