Configuring An Nfs Share - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
Result
After configuring a CIFS share, perform the following steps to check whether the parameters
are set successfully:
On a computer that runs a Windows operating system, choose Start > Run.
Type the IP address of the shared server (for example, \\97.100.100.121) and press Enter.
1.
2.
3.

4.7.2.5 Configuring an NFS Share

NFS sharing is the most common way to share files between Linux and UNIX hosts. NFS
enables users and programs to access files on a remote system in the same way they access
local files. To enable Linux and UNIX hosts to access shared folders on a server, you must
configure and enable the NFS sharing feature.
Prerequisites


Procedure
Step 1 Choose File and Storage ServicesShares from the navigation tree of the Server Manager that
is automatically started after a login to the operating system.
Step 2 Choose TASKS > New Share in the upper right corner of the SHARES area.
Step 3 Select an NFS share profile.
1.


2.
Step 4 Select a share location.
1.
Issue 04 (2018-11-06)
Enter the name and password of a user that is granted share permission (for example,
user department1-user).
On the share page, check that the shared folder configured with share permission is
displayed, for example, Shared folder 1.
Double-click Shared folder 1 to open the folder. Check that you can read and modify
files in the folder but cannot copy audio and video files to the folder.
For the operation permission on Shared folder 1, refer to the settings in
The hardware of the N2000 server has been installed and powered on.
You have logged in to Windows Storage Server 2012.
In the New Share Wizard window, select Select Profile to set an NFS share profile.
Two NFS share profiles are available: NFS Share-Quick and NFS Share-Advanced.
NFS Share-Quick provides the fastest way to complete a template of NFS share
configuration.
Compared with NFS Share-Quick, NFS Share-Advanced provides additional steps for
configuring management properties and share quotas. That is, NFS Share-Advanced
enables users to set share properties in a more detailed way. Therefore, you are advised
to configure an NFS share based on NFS Share-Advanced.
Select NFS Share-Advanced and click Next.
In the Server area, the local server is selected by default. In the Share location area,
select the volume or folder you want to share.
The share location is classified into Select by volume and Type a custom path.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the N2000H V3
Step 7 and Step 12.
99