Indicators And Buttons - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
Port
Mgmt management
network port
Serial port
Network port

1.4 Indicators and Buttons

This topic describes the indicators and buttons on the N2000H V3.
You can observe the indicators to determine the status of the N2000H V3.
Table 1-4
Table 1-4 Indicators and buttons on the front panel
Silk Screen
Issue 04 (2018-11-06)
Type
Ethernet port
DB9
-
describes the indicators and buttons on the N2000H V3 front panel.
Meaning
Fault diagnosis
digital tube
Power
button/indicator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quantity Description
unavailable.
1 The 1000 Mbit/s Ethernet
port is used to manage the
Appliance.
1 The port is used as the
system serial port by
default. You can set it to the
iBMC serial port by using
the iBMC command. The
port is used for debugging.
- The port types and quantity
vary according to the
configured NIC.
Color State Description

- ---: The Appliance is
operating properly.
 Error Code: A fault
occurs in Appliance
hardware.
For details about error
code, see HUAWEI Rack
Appliance Alarm Handling
(iBMC).

Yellow and Off: The Appliance is not
green powered on.
 Blinking yellow: The
iBMC is being started.
 Steady yellow: The system
is in the standby state.

Steady green: The system
is properly powered on.
NOTE
You can hold down the power
1 Product Overview
7