Installing The N2000H V3 - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
Data
Data preparation is not required for this operation.
Tools
The following tools must be available before the operation:




Procedure
Step 1 Check whether the packing case and seals are in good condition.
Step 2
When using a paper knife to unpack a packing case, ensure that the knife edge is of a proper
protrusion to avoid hurting hands or damaging the device in the packing case.
Use a paper knife to cut the pressure sensitive adhesive tape on the packing case, and open the
packing case.
Step 3 Based on
or damage. Ensure that there is no missing part.
Table 2-2 Packing items
No.
1
2
3
----End

2.3 Installing the N2000H V3

This topic describes how to install the N2000H V3.
Issue 04 (2018-11-06)
Protective gloves
Electrostatic discharge (ESD) gloves
ESD wrist strap
Paper knife
If the packing case is damaged (for example, the packing case is soaked or deformed, or the seals or
pressure sensitive adhesive tape is unsealed), fill in the Cargo Problems Feedback Form.
Table 2-2, check that the components are intact and free from oxidation, corrosion,
Description
Accessary box, containing the product documentation CD-ROM, one
Service CD, Quick Start Guide, and Warranty card.
A pair of guide rails.
One rack Appliance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installing and Removing the N2000H V3
31