Verifying Cable Connections; Removing The N2000H V3 - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
Do not block the air exhaust vents of PSUs. Otherwise, heat dissipation of the Appliances may
be affected.

2.4.8 Verifying Cable Connections

Before verifying cable connections, check that the power is cut off. Otherwise, any incorrect
connection or loose connection may damage the devices or injury the human body.
Table 2-3
Table 2-3 Cable connection checklist
Item
Power cable
Network cable
Ground cable

2.5 Removing the N2000H V3

This topic describes how to remove the N2000H V3.
Scenarios
Remove the N2000H V3 in the following scenarios:


Impact on the System
The services and programs running on the N2000H V3 will be interrupted when it is removed.
Prerequisites
Conditions
Issue 04 (2018-11-06)
lists the cable connection checklist.
Description
The power cable is correctly connected to the rear of the chassis.
Network cables are correctly connected to the management Ethernet
ports or service Ethernet ports on the rear panel of the chassis.
NOTE
The N2000H V3 provides no grounding port. It is grounded through the cabinet.
Ensure that the cabinet is properly grounded.
Its component is to be replaced.
Devices are to be relocated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installing and Removing the N2000H V3
60