Installing A Sata Dom - Huawei N2000H V3 User Manual

N2000H V3 Appliance
User Guide
Figure 7-70 Removing a SATA DOM
Step 3 Remove the SATA DOM from the mainboard. See step (2) in
Step 4 Place the removed SATA DOM in an ESD bag.
----End

7.35 Installing a SATA DOM

This topic describes how to install a Serial Advanced Technology Attachment (SATA) Disk on
Module (DOM) to replace the original one.
Scenarios
Install a SATA DOM when the original one fails.
Prerequisites
Conditions


Data



Tools
Issue 04 (2018-11-06)
You have powered off the N2000H V3. For details, see
You have removed the chassis cover from the N2000H V3. For details, see
Removing the Chassis Cover.
You have determined the position on the N2000H V3 for installing a SATA DOM.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure 5-70.
3.2 Powering Off.
5.6
214