Assembly - Baileigh Industrial BP-3305CNC Operator's Manual

Assembly

Front Support
The front support arms install on the front face of the worktable. The support can mount in any
position along the front T-slot. The support can be raised or lowered to align with the lower die
as needed.
Foot Pedal Connection
Position the foot pedal and route the cable to the electrical
enclosure in a manner that will allow easy access during
operation but will minimize exposure of the foot pedal and
cable to damage from being stepped on. Locate the
connector on the underside of the electrical enclosure and
align and secure the connector.
Tank Filling
The hydraulic oil is the primary medium for transmitting pressure and also must lubricate the
running parts of the pump.
After installation of the machine and before machine startup, bring the oil level up to 90% of
capacity. Verify that any cylinder rams are is in the retracted position to prevent overfilling of the
tank. Recheck the oil level after the first few hours of operation and again after the first full week
of operation. Check hydraulic hoses and fittings for leakage.
A shortage of hydraulic oil can cause hydraulic system breakdown and damage to major
mechanical parts due to overheating.
15
15