Multi-Step Programming - Baileigh Industrial BP-3305CNC Operator's Manual

Multi-Step Programming

Multi-step program is used for processing single work piece of different processing steps, realize
consecutive implementation of multi-steps, and improve processing efficiency.
The following items may be programmed into the controller on this screen to be used for Multi
Stage bending.
Multi-Step Parameter Setting Screen 1
Parameter Unit
ST -
PP -
CP -
DLY ms
HT ms
Multi-Step Parameter Setting Screen 2
The Screen 2 information will be repeated for each ST (process step). Example; If 3 is entered
into the ST parameter, this screen will be repeated 3 times. Each screen may have its own X
and Y values.
Parameter Unit
X inch
Y inch
XP inch
YP inch
DX inch
RP -
Setting Range
0 ~ 25
0 ~ 99999
0 ~ 99999
0 ~ 99999ms
0 ~ 99999ms
Set Up Range
-
-
0.310 – 20.000
0.118 – 3.100
0.000 – 10.000
1 ~ 99
Remarks
Stations. Set up total processing step number of
this program
Number of preset work piece.
Number of current work piece.
The CP line is a bend counter line. If 0 (zero) is
entered for the PP value, the CP line will continue
to count each bend cycle as one bend. If the PP
line has a value, the CP number will count down
from the programmed value to 0 (zero) to
complete the counted parts.
Delay Time for X axis retract and return
movement.
The time between down travel limit switch being
engaged and end hold time output.
Remarks
Current position of X axis, unable to be modified.
Current position of Y axis, unable to be modified.
Program position of X axis.
Target position of Y axis.
Retract distance of X axis.
Repeat Time. This is the number of times the
system will repeat this exact same bend settings
before moving on to the next station screen.
33
33