Using The Command And Response Tables - Extron electronics FOX3 Matrix 80x User Manual

Using the Command and Response Tables

The
Symbols used in the table represent variables in the command and response fields.
Command and response examples are shown throughout the table. The SIS commands are
not case sensitive. The ASCII to Hex conversion table below is for use with the command
and response table.
Space
NOTE:
Special Characters
The switcher does not accept these characters as the name of the switcher, passwords, or
locally created file names. All alpha-numeric characters permitted except
Command and Response Table for SIS Commands
ASCII to Hex Conversion Table
• For commands and examples of computer or device responses used in this guide,
the character "0" is used for the number zero and "O" is the capital letter "o."
• Only instances marked with a • character require a space. Any spaces between
characters in the command and response tables are only inserted for ease of
reading.
• Unless stated otherwise, SIS commands are not case sensitive.
FOX3 Matrix 80x Switchers • SIS Configuration and Control
begins on page 24.
•
|
, and "space".
22