Disabling Compatibility Mode; Web Page Panels - Extron electronics FOX3 Matrix 80x User Manual

5.

Disabling Compatibility Mode

The internal web page does not support compatibility mode in Microsoft Internet Explorer.
To check compatibility view settings:
1.
2.
3.

Web Page Panels

The FOX3 Matrix 80x internal web page (see
read-only view of the status of the switcher, with some editable fields for the following
categories:
1
2
3
The panels that can be edited have an EDIT link to click to access the panel. To view
general information about the FOX3 Matrix 80x, click the ABOUT link (
FOX3 Matrix 80x).
Figure 30. Network Password Prompt
Click the Sign In button, if the unit is password protected.
From the Tools menu of the browser, select Compatibility View Settings. The
Compatibility View Settings dialog box opens.
Be sure the Display all websites in Compatibility View checkbox is clear,
and the IP address of the scaler is not in the list of websites that have been added to
Compatibility View.
Click Close.
Device Info Panel
Device Status Panel
Network Settings Panel
figure 31 on page 42) provides an overall,
Firmware Panel
4
Roles and Permissions Panel
5
Dante Device Info Panel
6
FOX3 Matrix 80x Switcher • Internal Web Page
see About the
7
41