Extron electronics FOX3 Matrix 80x User Manual page 13

Modular, field-upgradeable and hot-swappable design — The FOX3 Matrix 80x
•
provides substantial flexibility, expandability, and affordability by allowing users to select
the configuration required for their systems. Additional input and output boards may be
added at any time for easy and quick upgradeability, expansion, or new technologies.
Hot-swappable components allow the user to replace an I/O board or power supply
at any time without the need to power down the switcher. This is especially useful for
mission-critical applications that require continuous operation.
• RS-232 insertion from the Ethernet control port — System level device control
to all remote locations via the matrix switcher Ethernet port, providing comprehensive
control of endpoints and attached devices without needing additional cabling.
Multimode and Singlemode I/O boards available — The FOX3 Matrix 80x is
•
configurable with a mix of multimode and singlemode versions of the FOX3 Matrix 80x
I/O 88 boards, so that both short and long haul transmission can be supported.
Dual redundant and hot-swappable power supplies — One primary and one back-
•
up power supplies provide added reliability for critical applications.
• Advanced computer-aided diagnostics — Provide 24-hour self-diagnostics of input/
output boards, primary and redundant power supply voltages, fiber links, and overall
functional status of the matrix. Using the Ethernet or RS-232 communications port,
status monitoring is possible for off-site or unmanned locations, such as government,
military, medical, or any other sensitive, 24/7 environments.
• Two AC power inputs — For added power reliability, some 24-hour environments
require two separate AC power sources, one as the primary source and the second
for redundancy. The FOX3 Matrix 80x provides two AC power inputs for continuous
connection to both power sources.
Industry standard LC connectors provide reliable physical connectivity and
•
precise fiber core alignment
Ethernet monitoring and control — The matrix switcher can be proactively
•
monitored and managed over a LAN, WAN, or the Internet, using standard TCP/
IP protocols. Ethernet control provides for remote selection of input and output ties,
system set-up and configuration, and advanced system diagnostics.
• Secure Ethernet communication using SSH - Secure Shell protocol — SSH
protocol ensures communication between the control system and the matrix is
encrypted.
• RS-232 control port — Enables the use of serial commands for integration into
a control system. Extron products use the SIS - Simple Instruction Set command
protocol, a set of basic ASCII commands that allow for quick and easy programming.
• Front panel USB configuration Port — Enables easy system configuration without
having to access the rear panel.
• JITC Certified — Successfully completed interoperability and information assurance
testing for use in government applications and other mission-critical environments.
• Easy setup and commissioning with Extron PCS - Product Configuration
Software — Conveniently configure multiple products using a single software
application.
• Rack-mountable 5U, full rack width metal enclosure
• Internal Extron Everlast power supply — Provides worldwide power compatibility,
with high-demonstrated reliability and low power consumption for reduced operating
cost.
Extron Everlast Power Supply is covered by a 7-year parts and labor warranty
•
FOX3 Matrix 80x Switchers • Introduction 5