Appendix; Location And Function Of Parts And Controls; Pcs-P1/P1P Communication Terminal - Sony PCS-1 Operating Instructions Manual

Appendix

Location and
Function of Parts
and Controls
PCS-P1/P1P Communication
Terminal
Front/Right side
1 2 3
ON LINE POWER
a ON LINE indicator
Blinks during dialing or answering and
lights in blue when connection is
completed. It turns off when the system
is disconnected.
b POWER indicator
Lights in green when the power switch is
set to on (@). Lights in orange when the
Communication Terminal is set to
standby mode.
c LAN ALERT indicator
Lights in yellow when packet error
(loss) or link error occurs during
communication.
d Memory Stick slot
Insert a "Memory Stick" (not supplied)
into this slot.
4
LAN ALERT
5 6

Location and Function of Parts and Controls

e Power switch
Turns on/off the Communication
Terminal. The power is on when the
switch is set to the @ side and off when
the switch is set to the a side.
f AUX CONTROL connector (D-sub
9-pin)
Used for service.
Rear
1 2 3 4 5
AUDIO OUT VIDEO IN AUDIO IN CAMERA UNIT
AUX1– –AUX2
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
IR OUT
1
q; qa qs qd qf qg
a AUDIO OUT (MIXED) jack (phono
jack)
Used when recording the sound to
minute a conference. The mixed sounds
of a local and remote parties are output
from this jack.
b AUDIO OUT jack (phono jack)
Connect to the audio input of the TV
monitor.
c VIDEO IN AUX 1 connector (mini
DIN 4-pin)
Connect to the video output of external
video equipment.
d VIDEO IN AUX 2 jack (phono jack)
Connect to the video output of external
video equipment.
e AUDIO IN jack (phono jack)
Connect to the audio output of the
optional VCR or audio equipment.
f CAMERA UNIT connector
Connect to the TERMINAL connector
on the rear of the Camera.
6 7 8 9
MIC
(PLUG IN POWER) ISDN UNIT WHITE
1 2
BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
2
qh qj qk
155