Sony PCS-1 Operating Instructions Manual page 46

Page 1/7
ISDN Setup
Page: 1/7
Country/Region
Country/Region Code
Protocol
Country/Region
Selects the country or region where you use
the Communication Terminal.
You can select from among Europe
(excluding France), France, Japan, USA and
Other.
Country/Region Code
Enter the country code or region code.
For customers in the USA and Canada, see
"SPID Setting for Customers in the USA and
Canada" on page 47.
Protocol
Selects the protocol of the ISDN lines to be
used.
You can select Japan (NTT), Euro ISDN,
Euro ISDN (France), National ISDN,
5ESS(P-MP), 5ESS(P-P) or DMS-100
depending on the interface you are using.
For customers in the USA and Canada, see
"SPID Setting for Customers in the USA and
Canada" on page 47.
Page 2/7
Shows the A1 to C2 text boxes for inputting
the telephone numbers.
ISDN Setup
Page: 2/7
Area Code Local Number
A1
A2
B1
B2
C1
C2
46
Registering Local Information
ISDN
USA
1
National ISDN
Save Cancel
Save Cancel
Area Code
Enter the area code to be used for the ISDN
interface. Do not enter the first "0" number
of your area code.
Local Number
Enter the telephone number (local number)
to be used for the ISDN interface.
Note
The D1-F2 text boxes are shown on the next
page (Page 3). Fill in the boxes depending on
the lines you connect.
Page 4/7
Shows the A1 to C2 text boxes for inputting
the telephone numbers.
ISDN Setup
Page: 4/7
Sub Address:
A1
A2
B1
B2
C1
C2
Sub Address
Enter the sub-addresses when registering
them. Only numerals are available for a sub-
address.
Note
The D1-F2 text boxes are shown on the next
page (Page 5). Fill in the boxes depending on
the lines you connect.
Page 6/7
Shows the A1 to C2 text boxes for inputting
the telephone numbers and the Auto SPID
tab.
ISDN Setup
Page: 6/7
SPID
A1
A2
B1
B2
C1
C2
Auto SPID
Save Cancel
Save Cancel