If the Communication Terminal does not function correctly, check the following.
The power is not
Three indicators on
the front of the
No sound or the
volume is very low.
Picture is blurred.
The power switch is not set to on.
The batteries in the Remote
Commander are low or dead.
The fan inside the Terminal stops.
The volume of the System is too
The volume of the TV monitor is
The microphone on the remote
party is turned off.
"Mic Select" is not set properly.
Audio input is not selected
The microphone or external
equipment is not connected
Manual focus is selected but picture
When auto focus is selected, the
background is too bright, contrast is
too high, or the background or the
participants' clothes contain fine
Set the power switch to on (
Replace the batteries with new ones
Turn off the system immediately and
consult with Sony dealer.
Adjust the sound volume by pressing
the VOLUME +/– buttons on the
Remote Commander (page 26).
Adjust the volume of the TV monitor.
Ask the remote party to turn on the
Set up "Mic Select" properly
according to the microphone to be
used (page 43).
Set up "Input Select" properly (page
Check the connection (pages 104, 107
Adjust the focus (page 76).
Select manual focus and adjust
manually (page 77).