Download  Print this page

Advertisement

Entering Characters

This section explains how to enter the
letters, numerals or symbols on the text box
in the menu using the Remote Commander.
MIC
ON/OFF
VOLUME
ZOOM
VIDEOINPUT
DISPLAY
SELECT
CLEAR
SYMBOL
PinP
FAR/NEAR
BACK
ALPHA/
SPACE
NUM
PUSH
ENTER
RETURN
MENU
CONNECT/
DISCONNECT
HELP
PCS-R1
To enter letters or numerals
1
Press the FAR/NEAR (ALPHA/
NUM) button repeatedly to enable the
alphabet or numerals to be input.
2
Press the number buttons repeatedly to
enter the letters or numerals you want.
You can enter the letter shown on each
button by pressing it repeatedly.
You can enter the numeral shown on
each button by pressing it.
To enter a symbol
Press the VIDEO INPUT SELECT
(SYMBOL) button repeatedly to select the
DISPLAY (CLEAR)
button
VIDEO INPUT
SELECT (SYMBOL)
button
FAR/NEAR
(ALPHA/NUM)
button
PinP (BACK
SPACE) button
Number buttons
(dot) button
desired symbol. Pressing the 0 button also
enables you to enter the symbol, –, " or ".
To enter a dot (.) for an IP address
Press the
button.
To delete a character
Press the PinP (BACK SPACE) button. The
last entered character is deleted.
To delete all characters in a line
Move the cursor to the line to be deleted,
then press the DISPLAY (CLEAR) button.
35
Using the Menu

Advertisement

Table of Contents

This manual is also suitable for:

Pcs-1p

Comments to this Manuals

Symbols: 0
Latest comments: