Download  Print this page

Advertisement

c DISPLAY (CLEAR) button
Switches the picture displayed on the
monitor screen.
Deletes a line when used for character
input.
d PinP (BACK SPACE) button
Displays a window picture when pressed
during communication.
Each time you press this button, the
location of the window picture changes.
Pressing the button displays the picture
in full screen while the Camera menu
opens.
When used for character input, deletes
the character you entered last.
e Arrow buttons (V/v/B/b)
Used to select the menu or make various
settings in the menu. Also used for
camera angle adjustment.
f RETURN button
Used to return to the previous layer in
the menu.
g PUSH ENTER button
Executes the selection or setting in the
menu and goes to the next layer.
h Number (0-9,
Used to enter the letters or numerals of a
telephone number, etc.
Used for focus, brightness and backlight
compensation adjustments.
i
@
/
1
(power on/off) button
Sets the Communication Terminal to
standby mode when it is turned on.
Turns on the Communication Terminal
when it is in standby.
j ZOOM (T/W) buttons
Zooms in or out.
T: to enlarge the picture
W: to reduce the picture
158
Location and Function of Parts and Controls
,
) buttons
k VIDEO INPUT SELECT
(SYMBOL) button
Selects the video input signal. Each time
you press the button, the input signal
switches.
Used to enter a symbol for character
input.
l FAR/NEAR (ALPHA/NUM) button
Switches the picture on a local or remote
site.
Switches the input mode between
alphabets and numerals for character
input.
m MENU button
Used to display a menu.
n CONNECT/DISCONNECT (
) button
Used to connect or disconnect a remote
party for a conference.
o HELP button
Used to show the help guide.
p Battery compartment (rear)
Insert two size AA (R6) batteries.
/

Advertisement

Table of Contents

This manual is also suitable for:

Pcs-1p

Comments to this Manuals

Symbols: 0
Latest comments: