Sony PCS-1 Operating Instructions Manual page 40

Number of Lines
Selects the number of ISDN channels used
to receive a call.
You can select from among 1B, 2B, 3B, 4B,
5B, 6B, 8B and 12B channels.
Restrict
Selects the transmission rate of the ISDN
lines when a call comes in.
Auto: Selects when connecting a remote
party via a normal ISDN line.
56 K: Selects when connecting a remote
party in a region or country where 56
Kbps is used for the ISDN transmission
rate.
Note
The system is set to connect an ISDN line at the
transmission rate of 64 Kbps at the factory.
However, some countries such as the USA or
some regions may use the ISDN transmission
rate of 64 Kbps and 56 Kbps. You may not
communicate with such country or region with
the transmission rate of 64 Kbps. In this case,
set "Restrict" to "56K" before dialing.
LAN Bandwidth
Select the bandwidth to be used when
connected to a LAN.
You can select from among 64 Kbps, 128
Kbps, 384 Kbps, 768 Kbps, 1024 Kbps,
1920 Kbps and "Other".
When "Other" is selected, a bandwidth value
between 1 and 1920 Kbps can be entered.
ISDN MSN
Selects whether you are using the Multiple
Subscriber Number.
On: Selects when you use the Multiple
Subscriber Number.
Off: Selects when you do not use the
Multiple Subscriber Number.
40
Registering Local Information
Page 2/2
Answer Setup
Page: 2/2
Video Mode
Video Frame
Audio Mode
Far End Camera Control
T.120 Data
Video Mode
Selects the compression format of the
pictures to be received from a remote party.
ALL: Receives pictures of any compression
format depending on the format used on
the remote site.
MPEG4: Receives pictures based on the
MPEG4 format.
H.263+: Receives pictures based on
Recommendation H.263+.
H.261: Receives pictures based on
Recommendation H.261.
Video Frame
Selects the number of video frame to be
received.
15 fps: Receives CIF format pictures at a
maximum rate of 15 frames per second.
30 fps: Receives CIF format pictures at a
maximum rate of 30 frames per second.
Audio Mode
Selects the compression format of audio to
be received from a remote party.
ALL: Receives any audio compression
format depending on the format used on
the remote site.
MPEG4 Audio: Receives audio based on
the MPEG4 format.
G.722.1: Receives audio based on the
G.722.1 standard.
G.722: Receives audio based on the G.722
standard.
G.729: Receives audio based on the G.729
standard.
G.728: Receives audio based on the G.728
standard.
G.723.1: Receives audio based on the
G.723.1 standard.
G.711: Receives audio based on the G.711
standard.
ISDN ALL
15fps
ALL
On
On
Save Cancel