Sending Audio/Video From The External Equipment To A Remote Party - Sony PCS-1 Operating Instructions Manual

Sending Audio/Video from the External
Equipment to a Remote Party
The Communication Terminal allows you to send the picture and sound output
from the connected equipment such as a VCR to the remote party.
To connect the video equipment for input
The Communication Terminal is equipped with two video inputs.
VCR, etc.
to S-video
output
S-video connecting cable (not supplied)
VCR, etc.
Note
Be sure to connect the audio cable to either of two VCRs.
To input audio/video from external equipment
To input video
Open the Video Input Select menu by pressing the VIDEO INPUT SELECT
button on the Remote Commander, then select the desired video input from the
"Near" text box in the menu.
To input the video from the equipment connected to the VIDEO IN AUX 1 or
2 jack, choose "AUX 1" or "AUX 2", respectively.
To input audio
Set "Input Select" to "AUX" or "MIC + AUX" in the Audio Setup menu. (See
page 42.)

Sending Audio/Video from the External Equipment to a Remote Party

to VIDEO IN
AUX 1
Video connecting
to video output
cable (not supplied)
to audio output
TERMINAL
AUDIO OUT AUX1– VIDEO IN –AUX2 AUDIO IN
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB
RGB OUT
to VIDEO IN
AUX 2
Audio connecting cable
(not supplied)
VISCA OUT
CAMERA UNIT MIC
(PLUG IN POWER) ISDN UNIT WHITE
1 2
BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
IR OUT
1 2
to AUDIO IN
107