Download  Print this page



The PCS-1/1P Video Communication
System is a videoconferencing system that
provides natural, face-to-face
communications with a remote party by
transmitting and receiving images and sound
via LAN (Local Area Network) or ISDN
(Integrated Services Digital Network)
Supports ITU-T international
videoconferencing standard
The Video Communication System
complies with ITU-T Recommendations
defined by WTSC for easy connection with
remote parties overseas.
ITU: International Telecommunication
WTSC: World Telecommunications
Standardization Committee
Supports data conferences
Use of the optional PCS-DSB1 Data
Solution Box allows the data from a personal
computer to be incorporated in the
presentation or to be shown on the projector.
Versatile use with a variety of
display units
The Video Communication System is
compact size, allowing easy installation on a
TV. The camera and the Communication
Terminal can be separately installed,
allowing for greater flexibility when using a
large-size plasma display, projector screen,
High transmission speeds and
high-quality picture capability
The Video Communication System accepts
a LAN bandwidth of up to 1920 Kbps. It also
allows connection to as many as six ISDN
lines; 12B channels usable by using the
optional PCS-B768 ISDN Unit.
Wide range of video/audio
compression format selectable
The Video Communication System supports
MPEG4, H.263+, H.263 and H.261 for
video compression format, and MPEG4
Audio, G.722.1, G.722, G.729, G.728,
G.723.1, G.711 for audio compression
format. You can choose whether priority is
given to video or audio depending on the
type of conference or video/audio equipment
used by a remote party.
QoS (Quality of Service) function
for optimization of bandwidth and
traffic packet through network
"Packet Resend Request" and "Adaptive
Rate Control" functions incorporated,
allowing solution for busy network traffic or
packet loss, which provides consistent high-
quality communication.
Easy setup and operation
The Help menu appears on the monitor
screen for guidance of operation. The menus
used for the system administrator or those
for conference participants are separately
Supports multipoint conference
Installing the optional PCS-323M1 H.323
MCU software (for LAN) or the PCS-
320M1 H.320 MCU software (for ISDN)
allows conduct of a multipoint conference.
Memory Stick slot equipped
The Communication Terminal is equipped
with a Memory Stick slot, allowing the use
of still images recorded with a digital still
camera and stored in the "Memory Stick".
Dual monitor system
Two monitors can be connected to the
Communication Terminal, enabling the use
of one monitor for motion pictures, and the
other monitor for pictures from a computer
or still images.


Table of Contents

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: