Download  Print this page

Advertisement

1 Enter the IP address of a remote party to connect in the IP text box.
Use the V, v, B or b button on the Remote Commander to select the IP text
box, then press the PUSH ENTER button. Then enter the IP address with
the number buttons on the Remote Commander. Enter the host name and
domain name when using the DNS server in the IP text box (ex.
host.domain). When using the gatekeeper, enter the user name and user
number registered in the LAN Setup menu (page 49).
Notes
• You can enter a dot ( . ) with the b or
Commander.
• To correct the entered number, press the PinP (BACK SPACE) button on the
Remote Commander. The last entered number is deleted.
• To delete the entered IP address, press the DISPLAY (CLEAR) button on the
Remote Commander.
2 Select the LAN bandwidth.
V, v, B or b
Use the
PUSH ENTER button. Press the
the displayed submenu, then press the PUSH ENTER button.
You can choose from among 64 Kbps, 128 Kbps, 384 Kbps, 768 Kbps,
1024 Kbps, 2048 Kbps and Other. When you select "Other", enter a LAN
bandwidth value between 1 and 1024 Kbps.
When using the ISDN
Dial
A
More Options
1 Enter the telephone number of a remote party to connect to in the A
text box.
V, v, B or b
Use the
box, then press the PUSH ENTER button. Then enter the telephone number
with the number buttons on the Remote Commander.
Notes
• Do not enter the prefix number in the telephone number text box.
• Even when you connect multiple ISDN lines (2B or more number of lines),
entering one telephone number of the remote party enables you to connect all the
lines used automatically.
• To correct the entered number, press the PinP (BACK SPACE) button on the
Remote Commander. The last entered number is deleted.
button to select "LAN Bandwidth", then press the
V
v
or
button to select the bandwidth from
Line I/F
ISDN
Number of Lines
6 B
Dial
Save
button on the Remote Commander to select the A text
Starting a Conference by Calling a Remote Party
button on the Remote
63

Advertisement

Table of Contents

This manual is also suitable for:

Pcs-1p

Comments to this Manuals

Symbols: 0
Latest comments: