Download  Print this page

Communication Submenu; Using A Convenient Menu Available During Communication - Communication Submenu - Sony PCS-1 Operating Instructions Manual

Video communication system.
Hide thumbs

Advertisement

Using a Convenient Menu Available
during Communication —

Communication Submenu

During communication with a remote party, pressing the PUSH ENTER
button on the Remote Commander opens the communication submenu.
The communication submenu allows you to perform operations often used
during communication only by selecting the item in the menu.
Communication submenu
Selecting each item with the V or v button and pressing the PUSH ENTER
button enables the following operations:
Send: Sends the picture displayed on the monitor screen as a still picture to a
remote party.
After it is sent, this item changes to "Clear". Selecting this item restores the
motion picture shot by the camera.
Save: Saves the picture displayed on the monitor screen to a "Memory Stick"
as a still picture.
Presentation SRART: Sends the RGB picture input from the optional PCS-
DSB1 Data Solution Box to a remote party. After sending, the item
changes to "Presentation STOP". Selecting the item ends transmission of
the RGB picture.
Displayed only when the Data Solution Box is connected to the
Communication Terminal.
Whiteboard ON: Sends the notes written on a whiteboard with the mimio Xi
attached. After sending, the item changes to "Whiteboard OFF". Selecting
the item ends transmission of the notes on the whiteboard.
Displayed only when the whiteboard with the mimio Xi installed is
connected.
Indicator OFF: Shows the indicators on the monitor screen if they are not
shown. While the indicators are shown, the item changes to "Indicator
ON", and selecting the item hides the indicators.
End: Clears the communication submenu.
100
Using a Convenient Menu Available during Communication — Communication Submenu
Send
Save
Presentation
START
Whiteboard
ON
Indicator
OFF
End

Advertisement

Table of Contents

This manual is also suitable for:

Pcs-1p

Comments to this Manuals

Symbols: 0
Latest comments: