Using The Isdn Connection - Sony PCS-1 Operating Instructions Manual

Using the ISDN Connection

Installing the optional PCS-320M1 H.320MCU software in one
Communication Terminal allows you to conduct a multipoint videoconference
among up to six points.
PCS-320M1
H.320 MCU
software
AUDIO OUT VIDEO IN AUDIO IN
AUX1– –AUX2
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
ON LINE POWER LAN ALERT
About the number of ISDN lines used and number of remote
parties for a multipoint conference
Set the number of ISDN channels and the number of remote points in the
Multipoint Setup menu. The following combinations are available.
1B × 5: Connects to five points via a 1B channel. (Six-point conference)
2B × 5: Connects to five points via a 2B channel. (Six-point conference)
4B × 3: Connects to three points via a 4B channel. (Four-point conference)
6B × 2: Connects to two points via a 6B channel. (Three-point conference)
To connect with a normal phone
When you are using an ISDN connection, a normal phone can be connected at
up to five points.
The 1B connection is only available for a normal phone.
Note
When using the ISDN connections, installing the PCS-320M1 H.320 MCU software
into two or more Communication Terminals does not allow cascade connection.
TERMINAL VISCA OUT
CAMERA UNIT MIC
ISDN UNIT
(PLUG IN POWER) WHITE
1 2 BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
IR OUT
1 2
ISDN
ON LINE POWER LAN ALERT ON LINE POWER LAN ALERT ON LINE POWER LAN ALERT ON LINE POWER LAN ALERT
Connection Examples for a Multipoint Videoconference
to ISDN 1-6
ISDN modular cables
to ISDN lines
(not supplied)
PCS-B768 ISDN
Unit
133