Sending Motion Pictures Input from an External Camera or Other
Equipment as Still Images
During communication a motion picture output from an external camera or
VCR connected to the Communication Terminal can be frozen, and then sent
to the remote party.
External camera, VCR, etc.
to video output
To send a still image
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
Display the picture you want to send on the monitor screen.
Press the VIDEO INPUT SELECT button on the Remote Commander to
display the Video Input Select menu, then select the input from which you want
to send a picture under "Near", and press the PUSH ENTER button.
AUX 1: Selects the picture input from equipment connected to the VIDEO IN
AUX 1 connector.
AUX 2: Selects the picture input from equipment connected to the VIDEO IN
AUX 2 connector.
Selecting "Object" enables you to display the picture input from the optional PCS-
DS150/DS150P Document Stand on the monitor screen.
Use the V, v, B or b button on the Remote Commander to select "Send",
then press the PUSH ENTER button.
The motion picture on the monitor screen freezes, and a still picture is sent to
the remote party. The still picture remains even after sending.
To cancel the still image display on the answering site
Select "Clear", or switch the input picture.
S-video connecting cable (not supplied)
Video connecting cable (not supplied)
(still image) icon with the V or v button.
MAIN– MONITOR– SUB
to VIDEO IN
to VIDEO IN
Sending Motion Pictures as Still Images
(PLUG IN POWER)