Monitoring The Local Picture As A Window Picture - Pinp Feature - Sony PCS-1 Operating Instructions Manual

Monitoring the Local Picture as a
Window Picture – PinP Feature
You can display the picture shot by the local camera on your monitor screen
as a window picture (Picture-in-Picture). This function enables you to check
how your own party is monitored on the remote site.
To display the window picture
Press the PinP button on the Remote Commander.
The local picture is displayed as a window picture.
To change the location of the window picture
Each press of the PinP button changes the location of the window as follows:
The window picture
disappears.
Notes
• The window picture is displayed in the same location as it was last located. The
window picture is not displayed if it was not displayed last.
• The window picture is not available while not in communication with the remote
party.
To display the remote picture as a window picture
Press the FAR/NEAR button on the Remote Commander to open the Display
Control menu and select "Near" under "Display" when the local picture is
displayed as a window picture. The remote picture is displayed as a window
picture with the local picture as the main picture.
84
Monitoring the Local Picture as a Window Picture – PinP Feature
Local picture
Remote picture
Monitor screen