Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Step 4 Click
Step 5 Check the checkbox to select the linkage method taken for the alarm input.
Step 6 You can also choose the PTZ linking for the alarm input. Check the relative checkbox and select
the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
Step 7 You can copy your settings to other alarm inputs.
Step 8 Click
Figure 8-48 Linkage Method
----End
8.7.6 Configuring Alarm Output
Step 1 Enter the Alarm Output Settings interface: Configuration>Advanced Configuration> Events
> Alarm Output.
Step 2 Select one alarm output channel in the Alarm Output drop-down list.
Step 3 Set a name in
alarm output (optional).
Step 4 The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min. The delay time
refers to the time duration that the alarm output remains in effect after alarm occurs.
Step 5 Click
configuration is the same as the settings of the arming schedule for motion detection.
Issue 02 (2014-12-25)
to set the arming schedule for the alarm input.
to save the settings.
to enter the Edit Schedule Time interface. The time schedule
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
for the
74
Advertisement
Table of Contents
