Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Figure 9-5 Recording Schedule Interface
Step 2 Check the checkbox of Enable Record Schedule to enable scheduled recording.
Step 3 Set the record parameters of the dome.
Figure 9-6 Record Parameters
l Pre-record: The time you set to start recording before the scheduled time or the event. For
l Post-record: The time you set to stop recording after the scheduled time or the event. For
l Recording Stream: You can select the stream type for recording; Main stream and Sub Stream
Issue 02 (2014-12-25)
example, if an alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds,
the dome starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s or not
limited.
example, if an alarm triggered recording ends at 11:00, and the post-record time is set as 5
seconds, the dome records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1min, 2min, 5min or 10min.
are selectable. If you select the sub stream, you can record for a longer time with the same
storage capacity.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Storage Settings
78
Advertisement
Table of Contents
