Configuring Recording Schedule - Huawei IPC6512-Z30 User Manual

IPC6512-Z30&6522-Z30
User Guide
Step 4 Click
Step 5 Enter the HDD Settings interface (Advanced Configuration > Storage > Storage
Management), in which you can view the capacity, free space, status, type and property of the
disk.
Figure 9-3 Initialize Disk
Step 6 If the status of the disk is Uninitialized, check the corresponding checkbox to select the disk
and click
When the initialization completed, the status of disk will become Normal.
Figure 9-4 View Disk Status
----End

9.2 Configuring Recording Schedule

There are two kinds of recording for the domes: manual recording and scheduled recording. For
the manual recording, refer to
you can follow the instructions to configure the scheduled recording. By default, the record files
of scheduled recording are stored in the SD card (if supported) or in the network disk.
Step 1 Enter the Record Schedule Settings interface: Configuration > Advanced Configuration>
Storage > Record Schedule.
Issue 02 (2014-12-25)
to add the network disk.
NOTE
After having saved successfully, you need to reboot the dome to activate the settings.
to start initializing the disk.
NOTE
l Up to 8 NAS disks can be connected to the dome.
l To initialize and use the SD card after insert it to the dome, please refer to the steps of NAS disk
initialization.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6.2 Recording and Capturing pictures
9 Storage Settings
Manually. In this section,
77